Hantek iDSO1070A Osciloscopio Inalámbrico 70MHZ
270.11 €
326,83 € IVA INCLUIDO
Osciloscopio inalámbrico de 70MHZ / 2 canales.
iPhone / iPad / Android / Windows.
Control multitáctil.
Comunicación WIFI (y también soporte USB).
Conexión Directa WIFI / Conexión Router.
Batería de litio incorporada con 4 horas de autonomia, sin necesidad de alimentación externa.
Se puede conectar con iPad y iPhone al mismo tiempo.
Excelente diseño, tamaño reducido facil de transportar.
Hantek iDSO1070 Osciloscopio Inalámbrico Wifi
70Mhz / 2 Canales
- iPhone/iPad/Android/Windows Oscilloscope, Multi-touch Operation.
- WIFI Communication (USB Communication), WIFI Direct Connection/ Router Connection.
- Build-in Lithium Battery , no need of External Power. Floating Measurement is available, safe and convenient.
- 70MHz Bandwidth, Real-time Sampling Rate 250MSa/s
- Can be connected with iPad and iPhone at the same time. When operating on iPad, it can also be observed on iPhone.
- Good mechanical design. The outer case is made by the same material with iPad - Anodised aluminium. It has great heat resistance and abrasive resistance with beautiful appearance. The hardness of aluminium alloy surface is greatly improved
- Small size which is convenient for traveling.
- Software Support:IOS,Android(Partial function),Win10,Win8, Win7, VISTA, etc.
- More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
- FFT spectrum analyzer
- Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
- The waveform data can be output as EXCEL, BMP, JPG according to time and voltage.
Model | iDSO1070A | |||
Bandwidth | 70MHz | |||
Channel | 2 CH | |||
Real-time Sampling Rate | 250MSa/s(singal channel), 125MSa/s(two channels) | |||
Sampling Mode | Sampli ng, Vmax , Vrms | |||
Average Sampling | Average waveform, times: 4, 8, 16, 32, 64, 128 | |||
Memory Depth | 6K | |||
Rise time | ≤5ns | |||
Time Base Precision | ±50ppm | |||
Time Base Range | 45s/div-70%s/div ( 1-2-4 sequences ) | |||
Input Coupling | DC, AC, GND | |||
Input Impedance | Resistance: 1MΩ; Capacitance:25pF | |||
Probe Attenuation Coefficient Setting | 1×, 10×, 100 × , 1000 | |||
Max Input Voltage | 35Vpk(DC+peak) | |||
Waveform Interpolation | Step, Linear, Sin(x)/x | |||
Input Sensitivity | 10mV/div~5V/div | |||
Vertical Resolution | 8Bit | |||
Vertical Displacement Range | 10mV ~ 5V/div @ x1 probe; 100mV ~ 50V/div @ x10 probe; | |||
1V ~ 70%V/div @ x100 probe; 10V ~ 5KV/div @ x1000 probe | ||||
Position Range | ±4division | |||
Low Frequency Response | ≤10Hz(at input BNC) | |||
DC Gain Accuracy | ±3% | |||
Bandwidth Limit | 20MHz | |||
Trigger Mode | Auto, normal, singal | |||
Trigger Type | Edge, Alternative | |||
Trigger Precision | ±4division | |||
Trigger Range | ±4V | |||
Trigger Sensitivity | 0.02 division | |||
Trigger Source | CH1, CH2, EXT | |||
Waveform Signal Process | +,-,x,÷,FFT, invert | |||
Temperature | Operating: 0℃-40℃; Non-operating: -20℃-60℃ | |||
Humidity | Below 35℃, ≤90% relative humidity; 35℃-40℃, ≤60% relative humidity | |||
Cursors Measurement | Cross, Trace, Horizontal, Vertical | |||
Auto Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle | |||
Volume | 190mm * 100mm * 35mm | |||
Weight | 0.7KG | |||
Accessory | 2 passive probes - PP80 |
iDSO1070A
Ficha técnica
- Canales de Osciloscopio
- 2
- Ancho de banda de Osciloscopio
- 70